Standard Features:
  • European Conformity (CE) Compliant
  • Automatic Pressure Control - Set to 10 Bar (145 psi)
  • Low Level Cut-Off with alarm
  • Solution / Detergent Tank
  • Adjustable Temperature Regulator
  • 12 Bar (174 psi) Safety Relief Valve
Included Options (Standard for Eagle Series Generators):
  • Steam Gun (20 ft Hose)
  • Steam Tool Accessories Kit
The European Conformity (CE) Certification on the Hawk Series Generator is your assurance that the unit is safe and legal to operate outside of the US and Canada, because it is compliant with CE Standards for Europe. For generators legal to operate in the US, check out our line of
Eagle Series Generators

Unit of Measure

Specifications

Brands

N/A Electro Steam™

Electrical Power Rating

N/A 30 kW

Boiler Horse Power

N/A 3.0 bhp
Alternating Current (AC) Power Supply Voltage1 N/A 400 V

Phase

N/A 3 Ø

Frequency

N/A 50 Hz60 Hz

Amperage

N/A 43.7 A

Approximate Heat Up Time

N/A 5 minutes
Steam Capacity2 N/A 47.0 kg/h103.5 lb/hr

Water Consumption

N/A 47.0 L/h12.4 gal/h

Gross British Thermal Units (BTU) Output

N/A 100,426 Btu/hr

Maximum Boiler Pressure

N/A 12 bar174 psi

Operating Pressure

N/A 10 bar145 psi

Boiler Temperature

N/A 184 ºC363 ºF

Temperature at Tip

N/A 212 ºF

Boiler Tank Capacity

N/A 16 L4.23 gal

Reservoir Tank Capacity

N/A 25 L6.6 gal

Solution/Detergent Tank Capacity

N/A 5 L1.32 gal
Boiler Material 3 N/A 304 Stainless Steel

Cabinet Material

N/A 304 Stainless Steel

Plumbing Material

N/A Brass

Weight

N/A 129 kg284 lb

Crated Weight

N/A 181 kg400 lb

Industry Standards

N/A European Conformity (CE)

Dimensions

Length

N/A 98 cm39 in

Width

N/A 54 cm22 in

Height

N/A 98 cm39 in

Crated Length

N/A 115 cm46 in

Crated Width

N/A 68 cm27 in

Crated Height

N/A 113 cm45 in

Included Options

EAG00033 Steam Gun Complete with 20 Feet (ft) Hose (Qty:1)

N/A

EAG00005 8 Inch (in) Curved Lance (Qty:1)

N/A
 

EAG00006 16 Inch (in) Curved Lance (Qty:1)

N/A
 

EAG00007 35 Inch (in) Curved Lance (Qty:1)

N/A
 

EAG00008 1 Inch (in) Circular Nylon Brush (Qty:6)

N/A
 

EAG00009 1 Inch (in) Circular Bronze Brush (Qty:6)

N/A
 

EAG00010 1 Inch (in) Circular Stainless Steel Brush (Qty:6)

N/A
 

EAG00011 2.5 Inch (in) Circular Nylon Brush (Qty:6)

N/A
 

EAG00012 2.5 Inch (in) Circular Bronze Brush (Qty:6)

N/A
 

EAG00013 2.5 Inch (in) Circular Stainless Steel Brush (Qty:6)

N/A
 

EAG00014 2.5 Inch (in) Circular Scrubbing Pad Holder (Qty:3)

N/A
 

EAG00015 Scrubbing Pads (Qty:12): Black - Heavy Duty (Qty:4)/Green - Medium Duty (Qty:4)/White - Light Duty (Qty:4)

N/A
 

EAG00038 Heat Resistant Gloves (Qty:1)

N/A
 

EAG00039 Safety Glasses (Qty:1)

N/A
 

EAG00055 O-Rings for Steam Gun Connector (Qty:25)

N/A
 

EAG00067 O-Rings for Steam Gun Tip (Qty:25)

N/A
 

More Options

  • 1 Every Hawk Series electric steam generator is custom built to accommodate only one (1) specific three phase (3 Ø) high voltage supply; the attached 25 foot (ft) flexible power cord (plug/socket not included) is sized according to the customer's specified power requirements (voltage and amperage) of the machine.
  • 2 Calculations are based off of a 100 ºC (212 ºF) boiler feed-water temperature. Boiler feed-water temperatures that range between 10-60 ºC (50-140 ºF) are approximately 80-90% of the calculated values shown. Boiler feed-water must not exceed 60 ºC (140 ºF).
  • 3 Wetted Surfaces